知識大講堂2016嶄新起航~
2015年離我們?cè)絹?lái)越遠,轉眼間2016年也已踏上征程。感謝大家在2015年對于本微信公眾平臺的大力支持
在本期的大講堂中,我們將分析講解“高低壓配電”系列中的“GCK低壓抽出式開關設備”這款產品
GCK低壓抽出式開關設備廣泛應用于發電廠
產品型號GCK的含義:
G:柜式結構
C:抽出式
K:控制中心
柜體尺寸:
概述
GCK低壓抽出式開關柜適用于三相交流頻率為50Hz
結構說明
柜體采用組合裝配式結構
主要性能與特點
1. 整柜采用拼裝式組合結構,模數孔安裝
2. 抽屜柜有效單元高度1800mm
3. 柜體上部為母線室、前部為電器室、后部為電纜進出線室,各功能室間有鋼板或絕緣板相互隔離,以保證安全;
4. 柜內抽屜小室的門與斷路器或隔離開關的開關操作手柄設有機械鏈鎖,只有手柄在分?jǐn)辔恢脮r(shí)門才可以開啟;
6. 采用高可靠性一次接插件;
7. 材質可選用冷軋鋼板、鍍鋅板
Overview
GCK low voltage switchgear cubicle is suitable for system with AC 50Hz,rated working voltage up to 660V,current up,and applicable for power generation,transmission,distribution,charge-over and consumption equipment control.It conforms of relevant standards such as IEC60439-1,GB7251.1 and JB/T9661 and are widely used in power plant,metallugical factory,petroleum industry,chemical industry,textile industry and high-rise buildings.Designed with advanced manufacturing technique and a modularized and flexible strucrture.
Structure instruction
The assembled cubicle has its framework made of C profiles.The top is wideopen and the horizontal busbar is placed at the top with the cover open or not.A rear door is provided with the outgoing at the rear,facilitating mounting and the drawer can use either XJG3(trigger three-position operation mechanism)or BPT(rotary three-position operation mechanism).The primary plug-in more dependability.
Main performance and features
1. The cubicle is of assembled structure,grids mounting,great versatility of parts and components,good applicability and high standardization level;
2. The effective height of drawer cabinet is 1800mm with module height of 200mm,300mm,400mm,500mm,600mm;
3. Cable department of sotiated at the upper,apparatus compartment at the front and cable access compartment at the rear.Steel plates or insulating plates are added as partition between each compartment as to ensure safety;
4. The door of drawer compartment has mechanical interlock with the operating handle of circuit breaker or disconnect switch,therefore,it is opened only when the handle is in breaking position;
5. Drawer(including 1/2 unit drawer)of MCC switchgear cubicle adapts mechanical three-position interlock device(connect position,test position and disconnect position);
6. Reliable primary plug-in;
7. Material optional with galvanized cold rolled steel,galvanized steel or Aluminumzinc coated steel.
中國國家強制性產品認證證書 聯系我們
產品示例:
5. MCC柜的抽屜采用機械三工位機構(包括200/2mm抽屜)具有三個位置(分離、試驗、連接);
國家強制性產品認證試驗報告